deformation

Approximate solution of grinding force has been resulted by weighted residual method from grinding bar's deformation.

本文从磨杆的变形反推磨削力的角度,应用加权残数法导出了近似解.

In this paper, the thermal error calibration principle of precision machines is presented, and the accuracy index of active calibration thermal deformation is proposed.

研究精密机械热误差校正的机理，提出主动热校正控制变形误差的精度指标。

Experimental research on thermal deformation of hardened cement paste

水泥石热变形性能试验

This paper studies its mechanism from stabilization, deformation and combined action.

本文从变形、受力和共同作用等方面研究其工作机理.

After scientific bamboo mosaic from the high temperature and high pressure, high deformation difficult.

竹材经过科学的高温高压拼接而成, 超高不易变形.

a deformation of the spine

脊柱的畸变

Thermal deformation temperature and liner expansion coefficient of the composite were decreased.

该复合材料的热变形温度有所降低,但线膨胀系数减小.

Torsion deformation is the biggest effect factor on elastic limit equivalent stress.

扭转变形是对钢丝的弹性极限等效应力情况影响最大的因素.

The reason of deduces deformation martensite in the drawing process is analysed also.

并分析了拉拔时产生形变马氏体的原因.

Works of art and design shape and deformation in the main realistic.

艺术设计作品的造型以写实和变形为主.

With decreasing fractal dimension, the softening degree increases and the deformation resistance decreases.

分形维数越小, 软化过程进行得越充分,金属的变形抗力越小.

A polarized scanning camera used for dynamic measurement of thermal deformation fields is proposed.

提出了利用偏振扫描相机进行激光散斑照相,研测了物体的二维热形变场.

Note ensure that the printer does not make the pressure relief image flattening or deformation.

夺目包管打印机不张力不会使浮雕影像变平或变形.

Longitudinal contraction deformation: The component contracts in the weld direction after welding.

纵向收缩变形: 构件焊后在焊缝方向上发生的收缩.

A method to predict residual deformation based on inherent strain was introduced.

阐述了以固有应变为基础的弹性板单元有限元残余变形预测法.

In chapter two, the governing equation of thermal buckling is established based on nonlinear geometry, the effects of transverse shear deformation are taken into accounted.

随后在几何非线性的基础上，考虑了横向剪切的影响，建立了复合材料层合扁球壳在均布荷载和温度场联合作用下的热屈曲控制方程。

The dynamic deformation process of sheet metal on the EMF was investigated.

分析了平板电磁成形的动态过程.

In this paper, the effect of room temperature deformation on boronization is investigated.

本文研究了室温形变对渗硼过程的影响.

In order to research the deformation and failure adoptingmodel experiment , the numerical simulation method to analyzes.

总结高陡路堑边坡变形与破坏的类型, 分析其影响因素.

Main inducement is to get friction for a long time, shoe disagreement foot and sufficient deformation.

主要诱因是长期受摩擦, 鞋不合脚和足畸形等.

Computational result shows that the deformation of tidal wave is changed slowly with the roughness increasing.

通过建立一维涌潮数学模型,以概化矩形断面河道为对象,对不同糙率下的潮波变形进行分析比较.

Significant mechanochemical coupling in dynamic deformation block rock and powder samples after experiments.

结果表明,动力变形中发生了明显的力学化学耦合作用.

Its characteristics include fast cutting , narrow and small deformation etc.

具有切割速度快, 割缝小等特点.

Experimental and Theoretical Study on Biaxial Strength and Deformation of Normal Concrete

普通混凝土双轴强度和变形的试验与理论研究

Rather than adding other metals, they developed a complex mechanical process involving repeated heating and very severe mechanical deformation, known as tempforming.

他们没有添加其他金属，而是开发了一个复杂的机械过程，包括反复加热和非常严重的机械变形，也就是所谓的形变回火法。

The calculated deformation is almost equal to the real situation by measurement.

经检测,计算变形量与实际情况基本一致.

First, the distribution of temperature field in the the steady state is obtained; then, the thermal elastic-plastic deformation of cell is calculated.

首先，计算了铝电解槽稳态温度场；然后，将温度场作为载荷，计算了电解槽的热弹塑性变形，得到了槽壳的变形、应力及应变分布。

The most wear form is adhesive wear, arc erosion and plastic deformation.

粘着磨损 、 电弧侵蚀、塑性变形是其主要的磨损形式.

Changing stresses bring about more cracking and rock deformation.

不断变化的应力导致更多的断裂和岩石变形。

Using the hot embossing machine as the thermal bonding device, effects of the bonding temperature, pressure and time on the deformation of microchannel dimensions are systematically studied using the orthogonal factorial design.

使用热压机作为热键合设备，采用正交试验设计方法，系统地研究了键合温度、压强和时间对于热键合过程中微沟道变形的影响；