deformations

Post-seismic deformations are investigated about strike-slip, thrust and tensile faulting considering different crustal layering structures in a spherical elastic-viscoelastic Earth model.

基于球体粘弹性地球模型，研究走滑断层、逆断层、张裂断层。

All you need is carbon included in the composite, because nanotubes will heat up in response to a small electric current. This can be produced with a handheld device. Any deformations will still change the heat flow, which can be picked up by the thermal camera.

你只需要向复合材料中加入碳纳米管即可：由于弱电流能使碳纳米管加热，而一个手持设备就能提供所需的电流，此时使用热感摄像机就能观测到内部形变引起的热流变向。

If this were not true it would imply that the given bar deformations were not compatible.

如果不对,说明所给的杆变形是不协调的.

The real-time forces and deformations of tire are recorded, and the shape and contact pressure distribution of tire contact area are measured by Prescale films.

实时记录了试验中轮胎受力与变形关系，并采用压力敏感膜测量了轮胎接地区域内的压力分布状况。

Appreciable differences may occur, however, when small deformations considerably alter the loading conditions.

当微量变形能使加载条件发生颇大改变时,就会产生颇大的差异.

Analysis and Estimation of Steep Slope Deformations Using Kalman Filter

基于卡尔曼滤波方法的高边坡变形分析与预测

The formulations are based on the thermoelastic version of the theory of Whitney-Pagano laminated plate, which includes thickness shear deformations.

该模型是建立在Whitney-Pagano迭层板理论和热弹性模型基础上，考虑了沿板厚的剪切应变。

Nuclear deformations confirm shell structure.

原子核形变证实壳层结构.

A Theory of Deformations of Module Algebras

模代数的形变理论

Using finite element method, the thermal and mechanical deformations of herringbone spiral groove mechanical seal are analyzed.

用有限元法分析了人字形螺旋槽机械密封的热变形和力变形。

Neglect the axial deformations and consider only the lumped masses.

略去轴向变形不计,仅考虑集中质量.

Such readings can reveal longer-period deformations in the earth.

这种读数可以反映地球 长周期 的形变.

There are widespread and rather strong intraplate deformations in Chinese continent.

中国大陆板内变形普遍比较强烈.

A fully discrete finite element scheme is presented for a nonlinear time dependent problem which models the antiplane shear deformations of a thermoplastic material, and an error estimate is derived.

对一个模拟热塑性材料剪切变形的非线性瞬态问题，给出了一种全离散有限元格式，并导出相应的误差估计。

Subsequently a few of debates develop around the local stresses and deformations of the main deck.

后续又对其主甲板的变形和应力分布进行了讨论。

The deformations in the contact slice of the model consist of two parts i.e. shear deformation and sliding deformation. For the normal constructive model, the nonlinear model between the normal stress and normal relative deformation was adopted.

该模型将接触带内的变形分为剪切变形与错动变形两部分，对于法线方向采用法向应力与法向相对变形之间的非线性模型。

Autogenous deformations, internal relative humidity and compressive strength were recorded.

自体变形, 内部相对湿度和抗压强度的记录.

We discuss in more detail the application of the coupledmode formalism to scalar waveguide deformations.

我们将详细讨论耦合模公式对标量波导畸变的应用.

Wave propagation in piezoelectric cylindrical laminated shells under large deformations was studied.

研究了考虑转动惯量和大变形效应的复合材料压电层合壳内的波传播规律.

The first three episodes took place in the Jinning epoch and the last episode occurred in the later period of the Caledonian movement. The structural features formed by four episodes of structural deformations are quite different eath other.

其中，前三期构造变形作用发生于晋宁期，第四期构造变形作用为后期加里东运动叠加的产物，四期构造变形作用所形成的构造形迹各不相同。

Generalized Theory of Thin Shallow Shell with Elastic Large Deformations

弹性大变形薄扁壳的广义理论

The deformation parameters of the FGM beams versus thermal loading and material gradient constant are plotted. The effects of material gradient properties and thermal loading on deformations of beam are discussed in details.

绘出了梁的挠度随温度载荷及材料梯度参数变化的特性曲线，分析和讨论了温度载荷及材料的梯度性质参数对梁变形的影响。

At the same time, accumulated thermal deformations thus surface sink and rupture due to higher bonding temperature can be reduced.

同时，又可以抑制过高焊接温度所带来的升温热变形积累，从而减小表面塌陷变形或断裂。

Initially, large deformations take place as a result of grain movements and readjustments.

最初, 由于颗粒的移动和调整而使多孔介质发生较大变形.

Evaluation of the additional stresses in spherical shells with angle deformations

球罐角变形附加应力计算的比较与评价

Without loss of generality, shear deformations will be neglected.

不失一般性, 忽略不计剪切变形.

Shape became magma: deformations and distortions, curves , elliptical, cellular, molecular shapes.

外形变患上恍惚: 变型和扭曲, 曲线,卵形, 蜂窝状的, 分子的外形.

Comparison of soil deformations caused by dynamic and static load.

动、静荷载下的土体变形比较.

The deformations in consideration include contact deformation and elastic deformation.

考虑的工件变形包括接触变形和弹性变形.

The process require high turing process and control of reldin g deformations.

对制作工艺及焊接变形控制要求较高.