layer thickness

The result gave the optimal filter particle diameter, layer thickness and filtration velocity.

根据实验结果,确定了最佳的过滤介质粒径 、 过滤层厚度和过滤速度.

These devices have optical waveguide structure, moderate doping level and active layer thickness.

该器件带有光波导结构并具有适当掺杂和有源层厚度.

Develops the mathematic model and program for the optimization design of insulation layer thickness.

建立了保温层厚度优化设计数学模型,并编制了优化程序.

It is generally believed: ink layer and a layer thickness to 8-100 microns.

一般认为: 墨层和胶层厚度应控制在 8-100 微米为宜.

It was found that the current and EL intensity synchronously swing with increasing Si layer thickness.

在一定的反向偏置下,电流和电致发光强度都随Si层厚度的增加而同步振荡,位相相同.

Results show that this protection method is reliable and the optimum thermal insulation layer thickness is related to the electric price, heating power of electric cable and the price of thermal insulation material.

研究结果表明：该防冻方案完全可靠，管道保温层经济厚度与电价、加热电缆功率设计、保温材料价格等因素有关。

Gelatinize globules real control glued layer thickness of plastic pan add the reverse formation of cots.

涂胶工序中,真正控制书背胶层厚度的是胶锅外反转的匀胶辊.

With the increase of the thickness of the thermal insulation layer, the cost of heat loss decreases, however the cost spent on the thermal insulation material and building will expand. Study on thermal insulation material and structure of high temperature gathering system for heavy oil

随着保温厚度的增加，热损失费用减少，但保温材料及保温层施工费用等一次性投资增加。稠油高温集输系统保温材料及结构研究

Then use the same way after measuring coating photographic-screen reduced thickness, the two worst layer thickness.

再用同样的方法测量涂布感光胶后的丝网厚度, 两者减差就是胶层厚度.

In this paper, some factors influencing bark pyrolysis properties are analyzed with thermobalance, which included temperature, heating rate, sample layer thickness and sample particle diameter. The correlation of terminal volatile yield is obtained.

采用热天平分析了热解温度、升温速率、试样层厚度和试样粒径对树皮热解特性的影响，得到树皮生物质的最终挥发分产量计算公式。

It analyzes and discusses thermal insulation layer thickness, interface temperature and external temperature and thermal loss on specific length of the complex conduit in accordance with thermal insulation design formula.

依据保温设计计算公式对保温层厚度、保温层界面温度和外表温度以及复合管单位长度热损失进行了分析和讨论。

When the glue layer thickness to a certain value, bond stretch will begin to decline.

当胶层厚度增到一定值后, 粘结牢度便开始下降.

Light intensity and layer thickness had little effect on the molecule weight of the polymer.

表面入射光强和液层厚度对分子量的影响不大.

The boundary layer thickness is a function of the convection condition, in the melt.

边界层厚度是溶体中对流条件的函数.

This paper investigated the effect of various kinds of current diversion layer materials and their thickness ratios of resistance-type thermal bimetals on resistivity and specific curvature values, and studied the process of this type bimetal cladding cold bonding and various effective factors.

本文探讨了电阻型热双金属的各种分流层材料及材料厚度比对其电阻率、比弯曲等性能的影响规律，研究了电阻型热双金属的冷轧复合工艺及其影响因素。