undercutting

They're undercutting us by 20 p a packet.

他们以每小包比我们的便宜20便士的价格跟我们抢生意.

Undercutting thriving business models is exactly what technology companies should do.

削弱欣欣向荣的商业模式正是技术公司应该做的。

The Design and Technical Conditions of Non undercutting for Involute Gear

渐开线齿轮不发生根切的设计与工艺条件

By repeatedly undercutting his price, his competitions soon had him on the ropes.

竞争者们一再削价与他抢生意, 很快就逼得他走投无路了.

Francis Collins says such delays are undercutting the value of the testing that aims to identify virus carriers and quickly get them isolated.

弗朗西斯·柯林斯说，这样的拖延削弱了旨在识别病毒携带者并迅速将其耳语的检测价值。

Anisotropic-A process of etching that has very little or no undercutting.

各向异性 - 在蚀刻过程中,只做少量或不做侧向凹刻.

He has a disconcerting knack of undercutting his own arguments.

他雕琢自己论点的才能令人张口结舌.

I'm certain that our rival companies are undercutting by keeping their prices so low.

我敢肯定竞争公司把价格定得这么低是在挖我们的墙角.

By repeatedly undercutting his prices, his competitors soon had him on the ropes.

不停降价, 他很快被竞争对手逼入绝境了.

But in late November 1945, he abruptly resigned in frustration, publicly blaming Foreign Service Asia experts like John Paton Davies and John Stewart Service for undercutting his efforts.

但在1945年11月底，他却带着挫败感突然辞职，还公开谴责戴维斯（John Paton Davies）和谢伟思（John Stewart Service）等美国驻外事务处的亚洲专家损害了他的努力。

Stress distribution and parameter optimization during undercutting of a block caving mining method

矿块崩落法拉底过程中底部结构应力分布及其参数优化

It is inferred that the average speed of central trough valley undercutting is 0.7 cm · a-1, and the average speed of tidal current delta accumulation outside the west mouth is 0.17~ 0.31 cm · a-1 after the Qiongzhou Strait formed.

推算自琼州海峡形成以来，中央深槽下切平均速度为0.7cm/a，西口外潮流三角洲堆积平均速率为0.17～0.31cm/a。

Compensation technique for < 100> convex corner undercutting in KOH anisotropic etching of silicon and its application

硅KOH腐蚀<100>晶向凸角补偿技术及应用

Methods 25 cases with simple lumbar vertebral canal stenosis were treated by enlarge undercutting laminae laminae.

方法采用潜式扩大开窗术治疗单纯性腰椎管狭窄症25例.

Design of Special Formwork to Realize Straight Bevel Gear Wheel Undercutting

实现圆锥直齿轮根切专用模板的设计

Suppliers must co-ordinate without negotiation on a mutually profitable price, then stop anybody undercutting it.

供应商必须在对双方有利的价格下达成默契的合作,而且任何一方都不可以事先降价.

Our SRX Luxury Collection test car ruled in the price category, undercutting the second-cheapest Volvo by about$ 6,500.

价格上有绝对优势，，比第二便宜的沃尔沃XC60还要便宜$6500。

Meshing interference and undercutting is a serious problem in designing and manufacturing gears with small numbers of teeth.

设计制造小齿数齿轮，轮齿啮合干涉及根切将是一个重要的问题。

Construction Technology for Undercutting Blind Ditch with Little Clear Distance Passing through Urban Overpass

暗挖小净距暗涵穿越城市立交桥施工技术

Following this rule , we will ensure that over cutting or undercutting will not occur.

这样就保证不会发生过切或切削不足现象.

The undercutting will appear if there is no compensation on convex corner in etching of Si.

在硅的腐蚀过程中,如果不对台面凸角加以补偿,会产生严重的削角现象.

The mathematical model of this hourglass worm including contact line equation, the thickness of sides tooth and the criterion function of undercutting are established.

建立了准平面二次包络环面蜗杆传动的接触线方程、边齿齿厚计算及根切判别函数等数学模型。

Convex Corner Undercutting and Compensation in Si ( 100) Wafer

硅（100）晶面的凸角腐蚀及其补偿