stiffener

This shows the small blocks glued to the stiffener.

这表明，小砌块胶合板向加劲。

Compressive Load Capacity of the Welded Hollow Spherical Joint with Pipe Stiffener Under Axial Compressive Force

钢管加劲焊接空心球节点的受压承载力分析

Effect of stiffener of extended endplate connection on failure mode in fire

加劲肋对外伸端板连接火灾下破坏模式的影响

Effect of reinforced stiffener to loading performances of shear wall of seam steel plate

加劲肋对带缝钢板剪力墙受力性能的影响

RESEARCH ON THE TOPOLOGY SHAPE DESIGN OF STRUCTURE BASED ON CA& Simulation on autogeneration of thin plates stiffener

基于CA的结构拓扑设计的研究&平面薄板加强筋拓扑形态创成的仿真

The optimization for bending stiffener is performed with fatigue probabilistic restraint.

考虑疲劳概率性的约束，对弯曲加强器进行优化设计。

This shows the stiffener glued to the disc.

这表明,加劲粘到光盘上.

Evolutionary structural optimization for stiffener layout problem of plate structures

薄板结构加筋布局设计的渐进结构优化方法

The factors which influenced the stability of steel-lined reinforced concrete pipe with stiffener rings are discussed.

对影响带有加劲环的内衬钢管的稳定因素作了讨论.

Dynamic response analysis of rigid perfectly plastic clamped square plates with stiffener subjected to blast loading

固支加筋方板在爆炸载荷作用下的刚塑性动力响应分析

Research on Design of Critical External Compressive Resistance of Buckling of Stiffener Ring of Underground Penstock

埋藏式压力钢管加劲环抗外压稳定设计的改进研究

Finite cylinder shell element method for analysis of local stability of stiffener penstock

加劲环式压力钢管局部稳定性分析的有限柱壳单元法

Study of the stability of a simple rectangular plate with a ribbed stiffener

具有加劲肋的四边简支矩形板的稳定性研究

Parameter analysis of connections with vertical stiffener between the concrete-filled square tubular column and steel beam

方钢管混凝土柱-钢梁竖向加劲板式节点参数分析

The classification of the effect of the adjacent stiffener ring and its values is suggested as well.

建议了相邻加劲环影响的分类及其参考值。

The design parameters of chamber and stiffener of hollow blade model were analyzed.

对空心叶片模型型腔和加强筋结构设计参数进行了分析；

Stiffener design of rectangular steel tube column to H-beam connections with vertical stiffener

垂直加劲肋方钢管柱-H梁节点加劲肋的设计

Based on the model in the references, this paper proposed a new ring beam joint with stiffener.

在参考相关文献模型的基础上，提出了一种带加劲肋的环梁节点。

This indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener.

研究表明裂纹是从纵向加劲助未熔透的对接焊缝中起始的.

Design of Stiffener in the Electronic Cabinet Based on the Three-Field Coupling Analysis

基于三场耦合的电子机柜加强筋设计

Two kinds of structural improvement projects are increasing connection columns and increasing the stiffener.

鼠标的两种结构改进方案分别为增加连接柱和增加加强筋。

The specimens are all steel beams with different stiffener ribs among the rings.

试件均采用钢梁，并采用构造不同的环间加劲肋。

Several Inquiry about Stiffener Design of the Metal Structure on Port Crane

港口起重机金属结构加劲肋设计若干问题探讨

The Stability Analysis of Plate with Transverse Stiffener under Partial Load

横向加劲板在局部载荷作用下的稳定性分析

In the end, the design formula of stiffener is put forward which can supply reference to engineering.

最后提出了加劲肋设计公式，供工程参考。

The strength analysis of tubular T-joint with single internal ring stiffener

T型管节点单内环加强强度研究

Research on buckling of buried penstocks with stiffener rings under external pressure

带加劲环埋藏式压力钢管外压屈曲的研究

Buckling analysis of ring-stiffened cylindrical shell considering plate/ stiffener interaction

筋对环肋圆柱壳的壳板屈曲强度影响分析

Welding crack and stiffener corrosion are investigated for simple panel structure.

对于简单板架结构，主要考察骨材和带板之间的焊缝裂纹和骨材腐蚀两种损伤。

The excess slightly beyond the stiffener will be trimmed off later.

过剩略有超出了加劲将削减小康稍后.