undersize的例句大全

Do not undersize supply and discharge piping.

供应管道和排泄管道的口径不要太小.

Undersize crankshaft main bearing journals.

尺寸小于标准的凸轮轴主轴承轴颈.

Undersize crankshaft main bearing journals. The important thing to know that it has an axis of symmetry-the optical axis.

尺寸小于标准的凸轮轴主轴承轴颈。重点是知道主镜有一个对称轴&光轴。

I believe they were fat , though I was at that time undersized for and not strong.

从我的年龄来说, 虽然我的个头不大,体质也不强壮,但是我的脸蛋儿确实有些肥.

The cubs were sickly and undersized. The small door opened and Gus stepped inside the cage.

那些幼兽又弱又矮小.小门开了，葛斯踏进兽笼。

Being a little undersized is really starting to take its toll on our PGs.

控卫个子还是小了点，总会在比赛中为此付出代价。

Determined by characteristics of sedimentagraph, undersize sedimentary faces and field test pressure in Ordos lower Paleozoic, Ordovician reservoirs are of a pressure system of oil gas.

依靠沉积相、沉积微相以及实测地层压力的差异对鄂尔多斯盆地古生界含油气系统进行划分，论证了奥陶系天然气藏落在一个含油气压力系统中。

Film screen printing cumulative undersize distribution curve

筛网印花，绢网印花筛下物累计分布曲线

Study on the Mathematical Model for Undersize Weight Percent of High-Frequency Fine Screen

高频细筛筛下产率数学模型的研究

Chlorine in undersize material was removed by alkali washing.

筛下物用碱洗法脱氯。

Research on Power Quality of Distributed Generation in Distribution Network; A Study on the Optimization of the Undersize And Its Distribution in EDM

分布式电源对配电系统电能质量的作用机理研究电火花型腔加工中加工余量分配的优化研究

Cumulative undersize distribution curve

筛下物累计分布曲线

A Study on the Optimization of the Undersize And Its Distribution in EDM Die forgings of aluminium and aluminium alloy& Dimensional tolerance and machining allowance

电火花型腔加工中加工余量分配的优化研究GB/T8545-1987铝及铝合金模锻件的尺寸偏差及加工余量

Secondly, according to the distinctive demand of bonnet tool polishing, the motorized-spindle system is designed and manufactured. Undersize crankshaft main bearing journals.

然后，根据气囊式抛光对电主轴的独特要求，设计并制造了电主轴系统。尺寸小于标准的凸轮轴主轴承轴颈。

Flounder in their larval stage, such as this one in Hawaii, resemble ghostly undersize replicas of adults.

幼虫阶段的比目鱼，就像夏威夷的这只，简直就是成鱼的小号复制品。

Other causes include the out-of-tolerance of blade chord width between adjacent blades, the undersize contact area of serrated working side and the local wearing of non-working side.

而相邻原机件叶片弦宽尺寸超差，锯齿形工作接触面积小，以及非工作面局部碰磨，是引发故障的次要因素。

Smaller parts and runner have the same needs as large ones Watch out for the transitions from runner to subgate and don't undersize those runners.

较小的部份和转轮有与大的相同需要留意从转轮到次闸的渐变段而且不尺寸不足那些转轮。

Conrad Anker, Brady Robinson and Jimmy Chin were confined to their undersize two-person portal edge several thousand feet up on the face.

康拉德•安科尔，布雷迪•罗宾逊和麦展只限于他们的尺寸不足二人入口边缘的数千英尺起来就面对。

The simulation experiment shows that the simulation result is close to the same with actual result, the relative errors between simulation result and actual result of oversize and undersize are-4.26% and 1.09%, respectively.

仿真结果与实测结果非常吻合，筛上产品、筛下产品的仿真值与实测值相对误差分别为-4.26%和1.09%。

The particles are passed through sieves of desired mesh size, and a number of particles are separated into two groups& an oversize and an undersize. The oversize particles are to be crushed again.

矿粒通过有规定尺寸筛孔的筛子被分为两类&过大块和筛下料。过大块被再破碎。