three-axis的例句大全

The method could makes shoe instep mould machined by using three axis milling machine.

该方法使鞋楦母模能在常规的三轴数控铣床上加工.

Taper support rib usually two or three cam roller contacts, in order to edge into the axis of rotation to be sent to the uniform output shaft.

锥度支撑肋通常与两个或三个凸轮滚子接触，以便入力轴的旋转可均匀地传送到出力轴。

The fully digital AC servo control system of a three axis brushless flight simulator is studied.

研究了一种用于驱动无刷转台中永磁同步电机的全数字交流伺服放大器.

The three sets of equations deduced on the assumption that the principal axis of stress coincides with the axis of anisotropy for calculating limit strains in anisotropic, aeolotropic and isotropic sheet metal stretching are special solutions of the general equations.

假定应力主轴与各向异性轴重合的各向异性、厚向异性和各向同性等三组计算金属板材成形极限应变的方程均为普遍方程的一些特例。

Analysis in Vibrative Performance for the Input Axis of Three Ring Reducer

三环减速器输入轴振动特性分析

Then three parameters of the coupling system are optimized by GA so that a coupling efficiency of 78.7% is permitted from that system in fast axis of LD-Bars.

并通过遗传算法优化了耦合系统的3个参数，使快轴方向的耦合效率达到78.7%。

The row of three courts laid on the central axis with the Grand Palace Gate.

这三座宫殿排列在大宫门的中轴线上。

Inclined load exists in the middle frame of HIT-1 Three axis Aircraft Simulator designed by Harbin Institure of Technology.

哈尔滨工业大学研制的HIT－1型三轴飞行仿真转台中框由于存在设计上不可避免的偏载负载力矩，影响了其响应速度和动静态精度的进一步提高。

The attitude control system of the earth observation satellite is a complicate, high accurate, long-life and earth-oriented three axis stable system with the solar panels orienting the sun in the sun synchronous orbit.

地球观测卫星姿态控制系统是个复杂的，高精度，长寿命对地三轴稳定，在太阳同步轨道上帆板对太阳定向的系统。

The blindness zone formulation caused by a satellite's passing zenith is deduced, then a new algorithm of confirming the Tilt range and the direction of Tilt axis is introduced based on TILT+ A '-E' three axes.

首先推导了卫星过顶时盲区的计算公式，然后给出了实施机械倾斜过顶跟踪时，基于TILT+A'-E'型三轴座架的倾斜范围的选取方法和倾斜轴方向的确定途径。

Development on low cost three axis motion control card

三轴低成本运动控制卡研制

Phase Identification and Speed Tracing of Three Axis Test Table

三轴台速率状态的鉴相及其速率牵引

Research on Analysing and Compensation of the Steady Disturbing Torque of the Three Axis Air Bearing Table parallel swivel bench vice

三轴气浮平台常值干扰力矩的分析与补偿平行轮轴钳工台虎钳

The product can realize movement along the three straight axis ( X/ Y/ Z) as well as realizing workpiece rotation and swing along the two rotary axes ( A-axis and C-axis).

该产品在实现刀具沿三个直线轴（X/Y/Z）运动的同时，实现了工件沿两个旋转轴（A轴和C轴）的回转和摆动。

The three parallel axis gear-bearing-rotor system dynamic characteristics change little while skew gear spiral angle varies between 8 degree and 20 degree.

斜齿轮螺旋角在8度到20度间变化时，三平行轴齿轮轴承转子系统的振动特性基本没有变化。

It consists of three major parts: manipulator, spindle and creel cabinet. The three shifting axis of the manipulator are orthogonality due to simplify the inverse kinematics analysis of mechanism. The style of wrist is orthogonal spherical wrist and position decoupling with orientation.

手臂部分的三个移动轴设计成正交结构，同时为了便于机构的逆运动学分析，将手臂的手腕设计成球型手腕，其位置和姿态解耦。

The three axis stabilized Earth oriented attitude control system adopted by FY 1 meteorological satellites represents an active control concept.

风云一号气象卫星姿态控制系统采用了三轴稳定对地定向的主动控制方案。

The Intelligent Control of Rapid Accurate Positioning System for Three Axis Turntable

三轴转台快速精密定位系统的智能控制

The three axis turntable servo system design and research is the main content in this paper.

本文主要对三轴转台伺服系统进行设计与研究。

Through finite strain measurement, the major axis ( X), the middle axis ( Y) and the minor axis ( Z) in the deformed rocks can be measured, and the ratio among the three axes ( X ∶ Y ∶ Z) can be calculated.

利用岩石应变测量方法测量出岩石中变形标志体长轴、中间轴、短轴之间的比值（X∶Y∶Z），计算构造块体的三轴比率；