diffusion bonding的例句大全

The properties of fired paste and the viscosity strongly affect diffusion bonding strength.

浆料的烧成特性和粘度对扩散连接强度影响较大.

A type of gold paste for diffusion bonding is developed.

研制了一种用于扩散连接的金浆料.

Alternate joining Methods: To glass and compressive systems include diffusion bonding and active brazing.

加入方法来替代玻璃和压缩系统包括扩散焊和钎焊活跃.

The possibility of the rolling diffusion bonding by thermo-simulator system Cleeble 1500 D was studied.

利用热模拟试验机模拟研究轧制扩散一次成形的可能性.

The results have the reference value for the correct selections of the rolling diffusion bonding parameters.

研究结果对正确选择轧制扩散工艺条件具有参考价值.

It is indicated that diffusion annealing can obviously raise the bonding performance of bonding interface.

分析了影响不锈钢与碳钢复合的主要因素,指出扩散退火可以明显提高复合界面的结合性能.

Testing for Transition Liquid Phase Diffusion Bonding of Turbine Guide Vanes

涡轮导向叶片过渡液相扩散连接工艺试验

Research on Superplastic Diffusion Bonding of Titanium Alloy and Stainless Steel

钛合金与不锈钢的超塑性扩散连接研究

In this thesis, using the vacuum hot pressing diffusion welding ( Vacuum Hot Pressing Diffusion Welding), which is called VHP for short, can achieve the bonding of industrially pure titanium and pure copper.

本课题采用真空热压扩散焊接（Vacuum Hot Pressing Diffusion Welding），简称VHP来实现工业纯钛和工业纯铜的扩散连接。

Research on Diffusion Bonding of Spheroidal Graphite Cast Iron and Copper

球铁与铜扩散接合的研究

The micromechanism for superplastic bonding of steels was suggested as the disappearance of original bond interfaces caused by atomic diffusion and grain sliding superplastic deformation.

通过接头显微组织分析，提出了钢超塑性固相压接机制为超塑变形的晶粒滑动和原子扩散造成的原始界面消失。

Atomic reaction model for diffusion bonding of metals

金属扩散焊接的原子反应模型

The research status quo of diffusion bonding of ceramics to metals is reviewed in this paper, and the emphases are placed on the interface reaction, stress analysis and bonding technology. Based on this, the unsolved issues in researches are pointed out.

本文综述了陶瓷与金属扩散连接的研究现状，重点介绍了界面反应研究、残余应力分析和连接工艺研究等内容，并在此基础上指出了研究中所存在的问题。

The bonding between chemical vapor deposition ( CVD) thick films diamond and cemented carbide was performed by diffusion brazing under controlled temperature, pressure and time. The filled intermediate layer materials are reactive metal Ti foil and Ag-Cu alloy foil.

采用扩散焊与钎焊相结合的方法，用Ti箔和Ag－Cu箔共同做中间层材料，在一定的温度、压力和保温时间下，实现了气相沉积金刚石厚膜与硬质合金间的牢固连接。

Study on Element Diffusion Behavior in TLP Bonding Process of Ni_3Al Based HT Alloy

Ni3Al基高温合金瞬态液相扩散连接过程中元素扩散行为研究

Transient Liquid Phase Diffusion Bonding of Carbon Steel/ Stainless Steel

碳钢/不锈钢的瞬间液相扩散复合

The diffusion happened between the surfaces of the Kovar/ Cu/ Kovar electronic packaging cladding sheets. The bonding mechanisms were the mechanic joggle and atomic diffusion of the interface.

Kovar／Cu／Kovar电子封装材料的界面存在少量元素扩散，界面结合由机械啮合机制以及元素扩散机制共同构成。

The results show that the WC particles partially dissolve in the liquid of steel, and the C and W contents substantially increase in the matrix close to the bonding surface, indicating that the alloy element diffusion and transformation occur.

结果表明：WC颗粒溶解于高温钢液，微区内W、C元素的含量显著提高，存在合金元素的相互扩散和迁移；