cladding的例句大全

Innovative laser processing ( surface hardening, surface alloying and cladding )

激光加工 ( 表面硬化 、 表面合金化以及涂覆 )

Using high power CO 2 laser a Ni-Cr-Al plasma coating on aluminum alloy surface a cladding layer.

文中利用高功率的CO2激光器,对铝合金表面的Ni-Cr-AI等离子涂层进行熔覆处理.

The preparation of ternary boride hard alloy cladding layer on steel substrate is studied.

研究采用铸渗法制备三元硼化物硬质合金覆层钢基材料.

The results indicate that the method accurately measure the bond strength of laser cladding.

结果表明,这种方法较为准确地测量了熔覆层与基体之间的结合强度.

Bimetal copper-cladding aluminum bars with different transition layers were manufactured by continuous casting.

在双金属连铸铜包铝复合棒坯试验中,出现不同过渡层的制品.

We proposed fabricating polymer segmented cladding fiber by bicomponent spinning is proposed.

提出了采用复合纺丝法制备瓣状聚合物光纤的新思路.

Between these are fixed precast concrete external cladding panels.

在它们之间填上预制混凝土的外层空心板.

Sterile Cladding For Medical And Food Preparation Areas Where A Sterile Environment Is Paramount.

在医学和食品保鲜领域无菌覆层技术极为重要.

Surface alloying, surface cladding layer and electron beam modification on cast aluminum alloy were mainly summarized.

主要对表面合金化技术 、 表面敷层和电子束改性等技术应用于铸造铝合金表面改性进行总结.

The repairing quality of the dies was achieved by optimum parameter of laser cladding and preheating.

通过优化工艺参数、机体预热的方法可以提高模具修复质量.

The effects of the optical beam width and cladding on imaging are analysed.

分析了光束束宽和包层对成像的影响.

Every house has its own facade, its own cladding to differentiate it from the others.

每家都有自己的门面, 自己的包层,以区别于其他人.

The conventional effective index method can only simulate the photonic crystal fibers with single cladding structure.

传统有效折射率方法只能模拟具有相同空气孔大小的单包层光子晶体光纤.

Laser cladding on metal surface is a new surface modifying technique developed in recent years.

摘要金属表面激光熔覆技术是近年来发展起来的一种新型表面处理工艺.

There is no way that they can make double cladding fiber and LD chip.

他们的光纤是那里做的?是自己做的么?

Metal cladding high rate of weld forming, welding deformation small.

金属熔敷率高,焊缝成形好, 焊接变形小.

Resistance ─ heated Welding technology and equipment for cladding pipes are introduced.

本文介绍双层卷焊管采用电阻加热焊接工艺与设备的原理.

The thickness gauge for cladding material is install in brush plating power supply.

镀层厚度控制器是电刷镀设备必备的装置.

The incision depth is larger than the cladding thickness but smaller than the optical fiber radius.

切口深度大于包层的厚度而小于光纤的半径.

The process makes stainless steel cladding very thin to reduce material cost.

该工艺可使不锈钢覆层很薄,从而降低材料成本.