absorber的例句大全

Elastomeric Bearings, Engine Mounts, Avionics Mounts , Tuned Vibration Absorbers , Tension-Torsion Straps, Dampers.

弹性体轴承, 发动机支架, 电子设备支架, 调谐吸震器, 阻尼器.

The dampening device is usually a hydraulic shock absorber, although, it could be an elastomer damper.

阻尼设备通常使用液压缓冲器, 尽管也可以用弹性缓冲.

The characteristics of zinc oxide ( ZnO ) surge absorber circuit for protecting against electromagnetic pulses ( EMP ) are measured.

测量了氧化锌浪涌吸收器电路在 电磁脉冲 (EMP ) 条件下的保护特性.

Hence a good absorber is a good emitter, and a poor absorber is a poor emitter.

所以良吸收体就是良发射体, 劣吸收体就是劣发射体.

The absorber clean gas zone consists of two stages mist eliminators ( ME ) .

吸收塔净烟区是由两级 除雾器 组成的.

To prevent his entire body from shaking, Mark outfitted himself with Nervous Groom Shock Absorbers.

为了避免全身发抖, 马克给自己装备了减震器.

Products wanted: Steering wheels, shock absorbers, seat belts, seats and helmets in the go-kart production.

需要货品: 生产小型竞赛汽车所需要的方向盘 、 减震器 、 坐位安全带 、 坐位及头盔.

The first two of these characteristics can be improved by the judicious use of absorbers.

适当地利用吸收体,可以使前两种相应特性得到改善.

All the jars and jolts were smoothed out by the shock absorbers.

所有的摇晃和震动都被减震器消除了.

The perfect mixing + plug-flow impinging stream absorber obviously overtakes bubble absorber.

利用撞击流和平推流的优点,开发出一种新型的撞击流吸收器.

Quenching agents could be particularly effective in combination with ultraviolet absorbers.

猝灭剂与紫外线吸收剂并用时效果更为突出.

The on line control of rotor vibration can be realized by using magnetic dynamic absorber.

用电磁动力吸振器可实现对转子振动的在线控制.

Because of the complexity of designing for Multilayered microwave absorber , it requires special CAD tools.

由于多层吸波材料设计的复杂性,有必要设计专用的CAD工具.

The panel resonance always affects the absorption characteristics of microperforated-panel ( MPP ) absorber.

板振动对微穿孔板吸声体的 声学 特性存在一定的影响.

This is accomplished by means of neutron absorbers or moderators.

这可使用中子吸收剂或慢化剂来达到.

In fact, the spring of the absorber is not massless.

实际上, 避振器的弹簧具有质量.

An external overflow pipe connects the absorber reaction tank to the box.

外部溢流管把吸收塔反应箱和密封箱连接起来.

All three units of the gear are equipped oleo pneumatic shock absorbers.

全部三个起落架单元安装双腔油气减震器.

Advance a new dynamic simulated method on the oleo-pneumatic shock absorber filling parameter tried process.

提出一种新的关于油气式缓冲器充填参数试验过程的动态模拟方法.

Our main focus of production has been pneumatic and hydraulic shock absorbers for automobiles and motorbikes.

我们的生产制造以汽机车的油压及气压之避震器为主要重心.