Kinematic model for a car's front multi-link sus-pension and steering system was developed using ADAMS/ CAR module. An investigation was done of the suspension's kingpin axis and wheel orientation.

Rear Suspension with Multi-Links of Nissan Motors, Japan

日产新型多连杆后悬架

The results indicate that the multi-link suspension can effectively restrain the changing of the wheel orientation, the pitching and rolling of the vehicle and compliance steering influence than the double wishbone suspension, and can enhance the handling characteristics of the vehicle.

结果表明，多连杆悬架对车身的侧倾和纵倾、车轮定位及顺从转向效应等都比双横臂悬架具有较好的抑制作用，有利于提高汽车操纵稳定性。

Considering the vehicles of the same type in foreign countries a double wishbone front suspension and multilink rear suspension are adopted to form a full vehicle, then the suspensions' kinematic parameters are optimized.

参考国外同类型车辆，前悬架选用双横臂悬架，后悬架选用多连杆悬架，并分别对前后悬架运动学参数进行了优化。

The Study on Optimal Design of Multi-link Suspension of Car and the Vehicle Stable Steering Characteristic

轿车多连杆悬架优化设计及整车稳态转向性能研究

Choosing one group of the data in the Pareto set, the comparative analysis between the mathematic model and the kinematic simulation model was attained. The results show the design method is a practical tool for the optimization design of the multi-link suspension.

在Pareto最优解集中选取一组数据，与优化前的模型作了对比分析，结果显示出：该方法对于多连杆悬架的优化设计有明显的效果，为多连杆悬架的设计提供了理论依据。

The front double wishbone suspension of a light pickup vehicle was improved and changed with a multi-link suspension, and the virtual prototype models of double wishbone and multi-link front suspension assembled with steering system were built with ADAMS/ CAR.

改进了某轻型客货两用车双横臂式前悬架系统为多连杆悬架系统，运用多体动力学软件ADAMS/CAR建立了该双横臂与多连杆前悬架及转向系统的虚拟样机模型。

The Kinematics Analysis of Double Wishbone and Multi-link Suspension System Based on the Software of ADAMS/ CAR

基于ADAMS/CAR的双横臂与多连杆悬架系统运动学分析

Encryption can be found almost everywhere in the operating system, from file transfers to file systems to networking.

几乎可以在该操作系统的任何地方找到加密处理，从文件传输到文件系统，乃至网络。

The use of hypotaxis and parataxis can be found almost everywhere in literature.

有关形合与意合的实例在文学作品中也几乎随处可见。

But now it can be found almost everywhere.

但是现在，可以发现几乎所有的电脑都有它。

By analyzing the current condition of the equipment management, the thesis summarizes the existing problems of the equipment management and the factors that influence the equipment efficiency.

本文通过分析付煤公司的设备管理现状，总结了付煤公司设备管理存在的问题和影响企业设备综合效率的因素。

With the rising development of mechanization and automation in corporate, the level of rising dependence on machine is also "gone up". How to challenge the device to zero failures, maximize OEE has become to the "focus" topic towards concern manufacturing enterprises.

伴随着企业机械化、自动化程度的日益提高，企业对设备的依赖也水涨船高，如何挑战设备零故障、尽可能发挥设备综合效率，成了制造型企业关注的焦点课题。

Based on application states of equipment in industrial production, a new Aeronautical Industry Standard-Overall Application Effectiveness and Evaluating of NC Equipment was put forward.

基于设备在工业生产活动中实际应用状态，提出了设备综合应用效率与测评（OAEE）航空行业新标准。

It is important to seek the life period of device most economical and the integrated efficiency upmost in order to improve the benefit. People has more and more realized this.

人们日益意识到要提高港口的经济效益就必须追求设备寿命周期费用最经济和设备综合效率最高。

How to modify the instrument to raise the efficiency of comprehensive usage and get the most reply from the limited fund?

如何优化高校的设备管理，提高设备的综合使用效率，使有限的资金投入取得最大的回报？

The problems listed above lead to low total efficiency and high costs of equipment maintenance and management of the locomotive depot.

这些原因导致该段设备维修管理的综合效率低，成本居高不下。

Operating costs have been under effective control of the company.

同时，在推行组织体系重构的过程中，提高机务设备管理的综合效率，有效控制企业运营成本。

Thirdly, On the basis of following the equipment management improvement scheme principle, we designed general framework of the equipment management system improved scheme.

这些问题直接导致了公司设备管理综合效率的低下；然后，在遵循设备管理改进方案原则的基础上，系统的设计了公司设备管理体系改进方案。

TNPM is in pursuit of integrated efficiency and full effective productivity, and calls on all employees and all system to participate for realizing overall normalization.

TNPM追求设备最高综合效率和完全有效生产率，号召全员、全系统参与，实现全面规范化。

And at the same time this article introduces the OEE theoretical knowledge, to increase the overall efficiency of key equipments, to increase the value adding capability of equipments.

文章同时还介绍了OEE的理论知识，用以提高关键设备的综合效率，提高设备的增值能力。