flanges

Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.

上述截面的管子可经抛光、涂层、弯曲、攻丝、钻孔、缩腰、胀口、成锥形或装法兰、颈圈或套环。

Technology: flange type of heating is heating pipe and welding flanges from fixed.

工艺: 螺牙法兰式电热管是由加热管与螺牙法兰焊接而成.

Closure flanges may be mechanically seamed or welded in place.

封闭装置凸缘可用机械方法或焊接方法洽当接合.

Flanges are used extensively for connections where removable system components are designed.

法兰作为连接方式广泛应用在设计要求可拆卸系统部件的地方.

Used as sealing materials for pipes, flanges, reaction vessels, valves, and other containers.

适用于管道 、 法兰 、 反应釜 、 阀门及容器上的密封装置.

That is, valves, pipe fittings, flanges, rubber joints, steel pipes steel pipes and other products.

即阀门, 管件, 法兰, 橡胶接头, 钢管,以及其它钢管制品.

The flanges are all forging to ensure the quality of welding seam.

法兰部分全品使用锻造产品,确保焊缝质量.

The engine-feed system interface is at the turbopump inlet flanges.

发动机与供应系统的交界是在涡轮泵的进口法兰盘处.

There are two flat area profile on both flanges.

两个法兰凸缘都有平面区域.

The web and flanges of the main girders were fabricated from ASTM A 441 steel.

主梁的腹板和翼缘用ASTMA441钢制造.

When male and female ( M F) or tongue and groove ( T G) type flanges are specified, the nozzle flange facing of the vessel shall be of female or groove type.

如指定使用外螺纹及内螺纹或榫面及槽面法兰，容器设备口法兰端面应为凹槽型。

Adjust windshield glass position until it is aligned with the flanges and adhesive.

调整挡风玻璃位置直至与凸缘和粘结剂对准.

Easily installed, with gasket, between standard class 125 flanges.

安装容易, 带垫圈, 位于标准125磅级法兰之间.

During fabrication slots for the stringers flanges were flame cut into box girders.

制造时,为安装纵梁翼缘,在箱型梁中用焰割法开槽口.

It is suggested that the flanges with 0.25, 0.6 MPa adopt the connection dimension for the flange with 1.0 MPa, while the thickness is kept at the original size, so as to simplify the connection dimension.

建议对0.25、0.6MPa法兰盘采用1.0MPa的对接尺寸，厚度仍采用原来的三种规格，从而实现对接尺寸的简约化。

Has through-bolted, rigid flanges matching B 16.5 Class 150 regular, short-body type.

具有贯穿螺栓, 坚固的法兰,符合B16.5,150磅级的常规 、 短阀体类型.

Check the screw holes of two flanges in the pipeline for alignment with reserved clearance.

检查管路两法兰的螺丝孔的是否有对正及预留的间隙.

Effective Width of Flanges for Continuous Tee-Beam

连续T梁桥翼缘的有效宽度

For motor operation gear box is provided with standard mounting flanges.

对于电机操作机构,齿轮箱配置标准安装法兰.

Hubbed threaded cast iron pipe flanges

GB/T17241.3-1998带颈螺纹铸铁管法兰

Remove the all of urethane from all pinchweld flanges.

由夹紧焊接凸缘去除所有尿烷.

Lower the valve into position between the pipeline flanges.

将阀门放低,使其进入管道法兰之间的位置.

The reactor pressure vessel composed of spherical top and lower heads, upper and lower flanges, bolts, cylinder and two O-rings, as a static indeterminate system has been studied.

本文将反应堆压力壳的球顶盖、上下法兰、螺栓、筒体及双道O形环作为一个超静定系统进行了应力和变形分析。

It is much easier to install between standard gaskets and line flanges.

在标准垫圈和管道法兰之间也更加容易安装.

At bottom of the flanges, there are tapped plugs for water drainage.

在进出水法兰的底部有放水用的螺塞.

When proceeding pump testing, it is laboursome and time-consuming to connect the pump and the pipe with the traditional method of flanges and bolts with low level of automatization.

水泵试验时，泵与管道的联接一般用法兰及螺栓联接，费时长，劳动强度大，自动化水平低。

Stress Analysis and Test Research of Lug Flanges in Ellipsoidal Heads

椭圆形封头凸缘法兰的应力分析及试验研究

Add sealed shim between the two flanges and then lock down the bolt.

安装时两法兰间需加密封垫片,然后均匀拧紧螺栓.

Asbestos rubber gaskets for steel pipe flanges with raised face

GB/T9126.2-1988凸面型钢制管法兰用石棉橡胶垫片

Provide steam rings for tube side inlet and outlet flanges.

管程的入口与出口法兰配备蒸汽环.