epoxy

Polyester film, inductive, epoxy resin coating.

聚乙酯膜, 有感结构, 环氧树脂包封.

Polyester acrylates's physical properties fall between epoxy acrylates and urethane acrylates.

聚酯丙烯酸酯的物理性能介于环氧丙烯酸酯和聚氨酯丙烯酸酯之间.

A corrosion protective and abrasion resistant PA 170 ternary nylon powder coating has been prepared, which can be used on epoxy-polybutadiene primer to form a good adhesion on metal substrates, and resists temperature shock and penetration of various liquids.

耐磨性、耐腐蚀性均佳的PA170三元尼龙粉末涂料，与环氧－聚丁二烯底漆配套使用，对金属底材的附着性良好，并能适应较大温度波动，抵抗多种介质的渗透。

Study on interlaminar tensile strength of carbon fiber/ epoxy composite

碳/环氧复合材料多向层间拉伸强度的研究

The epoxy resin E 51 and acid are used to synthesize curing EA resins.

环氧树脂和丙烯酸在适宜条件下合成EA树脂.

Often used as curing agents in epoxy compounds.

常被用作环氧树脂固化剂的化合物.

Epoxy structures can be similarly identified , provided they are not fully alkylagted.

没有完全烷基化的环氧结构也可以同样地加以鉴识.

Glass fiber reinforced epoxy resin is synthesized to meet the demand for substrates of foilstrain gages.

为满足传感器应变计基底材料的特殊要求,制备了玻璃纤维增强环氧型基底材料.

High purity calcium epoxidized acid salt with epoxy groups preserved completely was synthesized directly.

以一种简便的方法制备了环氧基保留完好的高纯度环氧脂肪酸钙.

A new kind of thermosetting epoxy modified acrylic varnish for metallic electroplated parts was developed.

研制出一种金属电镀件热固性环氧改型丙烯酸清漆.

Behavior of unidirectional glassfiber reinforced epoxy at low temperature tensile impact

单向玻璃纤维增强环氧树脂低温冲击拉伸性能的试验研究

This paper describes that the failure tensile load and deformation were tested by the specimens which were made from carbon-fiber fabrics and epoxy resin.

本文把单向碳纤维无捻布和环氧树脂制成复合材料试样，测试出其拉伸破坏载荷和变形；

A hot-melt epoxy resin system adapted for tape winding

适合热熔缠绕的中温环氧树脂体系

In this paper, epoxy resin adhesive modified by polysulfone is studied.

研究了聚砜改性环氧树脂胶粘剂.

All the robs are glued together by instant glue first and then by epoxy adhesive.

所有失去了粘在一起,是透过即时胶水第一,然后由环氧胶粘剂.

Tensile failure behaviour of edge notch in carbon fiber reinforced epoxy composite material

带边缘缺口碳纤维增强环氧复合材料拉伸破坏特性

This product is made by high strength fiber and epoxy resin under winding process.

该产品系采用高强纤维和环氧树脂经特殊工艺缠绕成型.

Epoxy Impregnating Resin with Low Viscosity and High Resistance to High and Low Temperature Shock for Miniature Electronic Components

小型电子元件用低粘度耐高低温环氧灌注胶的研究

On many modern wooden boats, epoxy coatings will have been used as a base for varnishing.

很多现代的木船将采用环氧涂层作底漆。

Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied.

同时对纤维塑料筋与水泥装和环氧树脂的粘结强度也进行了探讨.

A new kind of cryogenic tensile testing jig was designed, and it was used to measure the tensile strength, tensile modulus of elasticity and breaking elongation of epoxy/ nano-SiO2 composite at room temperature and 77 K.

设计了一套低温拉伸夹具，并用其测试了环氧树脂/SiO2纳米复合材料在室温和77K环境下的拉伸强度、拉伸弹性模量和断裂伸长率。

The application of one part epoxy dispersion for building field is discussed emphatically.

重点讨论了单组分环氧乳液作为胶粘剂在建筑领域的应用.

Now it has thinner for kinds of resin and PU, Epoxy and Am.

目前,公司产品涉及各类树脂稀释剂,PU面﹑底漆稀释剂, 硝基稀释剂及各类天那水等品系.

All conductor leads shall terminate at a terminal board that is permanently cast into the epoxy-sealed cable entry area.

所有导体接头都应该连接在接线端子板上，并采用环氧树脂永久密封在电缆进入区。

Epoxy acrylate was synthesised by reacting epoxy resin with acrylic acid.

用丙烯酸和环氧树脂合成了丙烯酸环氧酯.

The impact and toughness of unmodified cured epoxy resins are poor, which restrict its applications.

未改性环氧树脂固化物存在质脆、冲击性能差等缺点, 限制了它的应用.

May be precoated with epoxy, vinyl, polyurethane or other coatings recommended.

可以复涂以环氧 、 乙烯基 、 聚氨酯涂,以及其它推荐涂层.

High stable epoxy resin emulsion can be prepared through choice of optimum emulsififier and technological condition.

用乳化剂对环氧树脂进行乳化,制得较稳定的环氧树脂乳液.

The repulping of wet strength waste papers containing epoxy wet strength agents is difficult.

使用了环氧类湿强剂的湿强废纸存在再制浆困难的问题.

The main products of the company: Tetrabromobisphenol A, brominated epoxy.

公司主要产品品种: 四溴双酚A 、 高分子溴化环氧阻燃剂.