deforming

Its basic forms are rapture and fatigue, plastic deforming, wearing, holding-on, cold and hot fatigue, etc.

模具失效的基本形式有断裂与疲劳 、 塑性变形 、 磨损 、 咬合 、 冷热疲劳等.

Multi Point Forming ( MPF ) is a new flexible deforming technology for sheet metal parts.

多点成形是一种板材柔性成形新技术.

Depending on the intensity of the deforming forces the folds may be gentle, sharp, overturned, or overthrust.

根据变形力的强度，褶皱可以是平缓的，陡峭的，倒转的，或逆掩的。

He saw Jan as though someone had snatched a deforming mask from Jan's face.

他看见了简的真面目，仿佛有人把一个歪曲形象的面具从简的脸上撕了下来。

This research demonstrate that photo-plastic material memory faculty is confident to define plastic deforming strain distribution.

研究表明,利用光塑性材料记忆性确定塑性变形的应变分布是可靠的.

Long working life and small deforming can be realized by improving anneal process and quenching process.

通过改进退火工艺和淬火工艺,获得更高使用寿命和更小的变形.

Nanocrystalline materials can exhibIt'superplasticity at lower temperature and higher deforming rate.

纳米晶材料可在更低的温度、更高的应变速率下发生超塑性变形.

Based on the flow equation concerned on threshold pressure gradient and deforming media, this paper productivity equation and IPR forecasting method for low permeability reservoir.

基于考虑启动压力梯度和介质变形特性的单相流渗流方程，建立了适应于低渗透油藏油井的产能方程，并给出了低渗透油藏单相流IPR预测方法。

Effect Factors on Drawing Force of Deforming Process of Spiral Rib Steel Wire and Finite Element Simulation

螺旋肋钢丝成肋时拉拔力影响因素及有限元分析

This is a typical capsule that is pliable and non-deforming.

这是典型的圆滑而不变形的被膜.

Suitable for printing on the substrate board form that made of non-deforming materials.

适用于不易变形材质制成的板片形印件的印刷.

The effects of different deforming temperature on the superplasticity of 2 A 12 alloy were experimented and discussed.

试验并讨论了不同变形温度对2A12铝合金超塑性的影响.

In fact , many classical musicians now earplugs that reduce the volume of sound without deforming it.

许多古典音乐家会戴著降低音量、但不会影响音型的耳塞来保护自己的耳朵.

In the paper, based on the deformation theory, the author deduces the distribution regularities of strain, thickness of plate and real stress in the deforming region through analyzing stress and strain in the round hole burring process

通过对圆孔翻边应力应变分析，应用全量理论，推导出了变形区应变、厚度及变形时材料真实应力的分布规律

After finite element analysis of the coupled thermo-mechanical models of tube tension reducing, the tube deforming rule, the temperature change and the distributions of stress and strain are gained.

通过对管坯变形过程的分析，得到了管坯的成形规律、温度变化及应力应变分布。

The plate bottom adopt mutiple steel plate firm , durable, not deforming.

造粒盘盘底采用多条辐射钢板加强, 坚固耐用, 永不变形.

Then, the slip system and shear intension theories are used in the research of ductile deforming.

其次，以晶体的滑移系和切变强度等理论对工程陶瓷的塑性变形机理做了研究。

In fact, many classical musicians now wear earplugs that reduce the volume of sound without deforming it.

许多古典音乐家会戴著降低音量、但不会影响音型的耳塞来保护自己的耳朵。

Deforming resistance is capability of material resisting deform.

变形抗力是材料本身抵抗塑性变形的能力.

The shockwave front consists of an elastically deforming area, a plastically deformation area dominated by grain boundary sliding and a plastically deformation area dominated by dislocation emission.

冲击波波阵面由弹性变形区域、晶界滑移主导的塑性变形区域和位错运动主导的塑性变形区构成。

Some Exact Travelling Wave Solutions Of The Generalized Seventieth Order KdV Equation By The Fractionary Deforming Method;

计算结果表明，分数形变映射法可以十分有效，它是非线性复杂方程的求解特殊新方法之一。

Hot compression experiments on Ti-15-3 alloy are carried out on the Gleeble-1500 thermal simulator. Deformation activation energy under different deforming conditions is calculated and the main mechanism of high temperature deformation is discussed.

对Ti-15-3合金进行了等温压缩物理模拟试验，计算不同变形条件下的激活能数值，探讨此合金高温变形的主要机制。

Finite Element Simulation on the Deforming Process of Aero-engine Annular Blanks constructed so as to tip up or out of the way.

航空发动机环形锻件成形制造过程有限元仿真制造成可以一边翘起、不挡道的形式。

Furrows and ridges on the surface were caused by deforming ice.

现在火星表面的梨沟和山脊的就是冰层运动的结果.

It suggested that the cyclic stretch adjust the orientation of ECV-304 cells through the distinguishingly deforming course of cells in different direction, but not through rigid circumrotation or displacement of cells.

表明在周期拉伸过程中的取向调整是一个细胞具有方向差异性的变形过程，而不是刚性的旋转或位移。

The effects of oxygen and thermal degradation and deforming velocity on the tensile properties of the polypropylene film for packaging are studied through the mechanical tensile test. At the same time, the effects of ageing time on the yield strength and elastic modulus are discussed.

采用拉伸实验，研究形变速率对聚丙烯包装薄膜屈服强度和断裂强度的影响，同时研究在80℃条件下热氧老化处理聚丙烯包装薄膜后，老化时间对材料屈服强度和弹性模量的影响。

Especially, using the Young's modulus changing with plastic deforming can enhance accuracy of springback simulation more.

特别是采用随塑性变形而发生变化的弹性模量,会进一步提高回弹模拟的精度.

The utility model relates to an automatic tracking height changing and deforming towing pillow.

本实用新型涉及一种自动跟踪变高、变形牵引枕.

Based on the cold roll forming steel , its characteristic of roll-forming and deforming rule was analyzed.

以冷弯型钢中的槽钢为例, 分析了其辊弯成型的特点及变形规律.

Thickness distribution at the deforming zone of aluminum tube in mechanical expanding

铝管锥形模机械扩径变形区壁厚分布规律