debug

Link-maintenance frames are used to manage and debug a link.

连结维持讯框被用在连结的管理与除错.

Be proficient operate surface grinding, milling and debug tools.

能熟练操作磨床, 钻床及各类钳工工具.

The procedures are that Mex file is compiled with C++ or Fortran, Matlab interpreter transfers and implements dynamic connect function, install Mex file editor, debug and compile Mex file, transfer Mex file to realize read-write of serial port.

文件法用Matlab应用程序接口实现，其步骤：用C++/Fortran编写Mex文件，Matlab解释器调用并执行动态链接函数；安装Mex文件编辑器对Mex文件调试与编译；

Developing simulation test box to simulate on-field electro-hydraulic system signals and closed-loop system, it can achieve lab debug.

开发模拟试验系统，可以模拟电液系统现场的各种信号和闭环回路，实现实验室调试。

Once you are in debug mode, the target machine's kernel stops.

处于调试模式之后，目标机器的内核就停止了。

The rocket carry telemetry simulator is a kind of signal generator used to produce automatic emulate signal data flows for the front subsystems, in order that they can debug themselves. And the PCM telemetry signal of some special frame structure is usually needed.

箭载遥测模拟器是为遥测前端模块提供自动仿真数据，以便遥测系统进行自动检测的信号发生器，主要用于对一定帧格式的PCM数据流的模拟。

Return the defect boards to Debug to repair.

10把板退还Debug去维修.

Trace is normally defined in both Debug and Release versions.

跟踪通常同时定义在“调试”和“发布”版本中.

We'll use DEBUG to look at a floppy disk's Boot Record.

我们将使用DEBUG来看看软盘的引导记录.

When equal to true, debug mode only attempts to recreate the target directory structure, but won't copy any documents.

参数值为true时，调试模式只会尝试重新创建目标目录结构，但不会复制任何文档。

Hardware is composed of power module, main control chip, contactless reading and writing module, spi flash memory module, design and debug of antenna.

硬件部分包括电源模块、主控芯片模块、非接触读写模块、SPI flash存储模块，以及天线的设计与调试。

Realizing the unit debug and test of among the position detecting unit.

地址检测单元与地上发射单元的联合调试与测试。

DEBUG detailed explanation of the command line parameters, including format and uses the details.

详细的DEBUG命令行参数解释, 包含格式及用途、细节等.

Product test engineering department will finish all the design of hardware and software, then base on software and hardware to debug test parameter, until this device put into mass production smoothly.

产品测试工程部将完成从测试板硬件的设计到测试软件的开发，再到软硬件结合调试直至顺利量产测试的整个工程设计。

Once again, careful planning is the key; good planning simplifies program debug.

再重复一次, 精心的编程设计是关键, 优良的设计可简化程序的调试.

Programmers at our installation write and debug lengthy code.

我们站的程序员编写和调整长长的代码.

After debug is completed, the transceiver was placed in a water tank at the same depth and verified their communication ability.

调试完成后，将这对收发机水平放置于水槽的同一深度处进行水下无线通信收发实验以验证其通讯能力。

Debug your macros: insert breakpoints, play partially or loop your playback.

调试您的宏: 插入断点, 发挥部分或闭环您的播放.

You can debug a release build of an application.

您可以调试应用程序的发布版本.

The production lines ground to a halt for hours while technicians tried to debug software.

生产线停工达数小时之久，在此期间技术人员试图纠除软件错误。

It focuses on the system hardware design and data acquisition and processing software, a detailed description of the LOFAR digital signal processing and graphics display, sensor design, debug and test chamber sphere tank experiment design steps.

重点分析了系统硬件设计及采集处理软件的功能，详细描述了LOFAR数字信号处理及图形显示方式、传感器球体设计、试验室调试及水池试验等设计步骤。

Then Intermediate drivers based on Ad Hoc terminal hardware platform is developed, and the joint debug with router module, USB NIC drivers and MAC module is accomplished.

在此基础上，开发了基于纯ad hoc移动通信终端硬件平台的中间层驱动，并完成了和路由模块、USB网卡驱动、MAC层的联调。

Finally, we debug and test the Doherty amplifier design, and introduce the questions in debugging and testing process, and finally give the test results.

最后，我们对设计的Doherty功放进行了调试和测试，说明了调试当中应该注意的一些问题，最终给出了测试的结果。

Experience hardware debug device , such as multi-meter, oscillograph, etc.

有万用表 、 示波器等常用工具的使用经验.

This paper presents commands of DEBUG and its applications in system maintenance.

介绍了debug命令 的作用和它在系统维护中的几项应用.

Implementation of Debug and Monitoring Software for Microcomputer Interface Experiment System

微机接口实验调试监控软件的实现

Embedded cross debugger resolves the problem that the debugger can not directly run on target host with low configuration. Embedded hosts run the debugger and the target client using the debug agents.

嵌入式交叉调试器解决了在低配置目标主机上不能直接运行调试器的问题，实现在主机端运行调试器，目标端使用调试代理，两者通过网络或串口进行连接完成嵌入式交叉调试的任务。

These operators are used mainly to debug assembly-language code.

这些运算符主要用于调试汇编语言代码.

This model provides a good debug method for development of embedded system.

该模型为嵌入式系统的应用程序开发提供了良好的调试手段.

Explains how Debug and Release are used, and introduces build configurations.

说明如何使用“调试”版本和“发布”版本, 并介绍生成配置.