curing time

The results showed that the test temperature had certain influence on the Mooney viscosity, Mooney scorch time and curing behavior of rubber compound;

结果表明，试验温度对胶料的门尼粘度、门尼焦烧时间和硫化特性均有一定影响。

The compressive strength also varied with the curing time.

养护时间不同，其抗压强度有明显的差异。

Experimental results show that with crisscross winding method and 30% to 40% of resin content and 150 N to 200 N of winding tension for a fiber strand and GPC chart analysis to determine curing time, better comprehensive performance of the composite materials can be obtained.

结果表明：采用交替铺层方式缠绕成型，含胶量控制在30%～40%（质量分数），缠绕张力控制在150N～200N，采用GPC谱图控制固化时机，得到的复合材料综合性能较好；

Take the average temperature in the curing time as curing temperature.

养护温度取各湿喷桩养护期的平均气温。

Low temperature and high vacuum tumble technology being widely used at home and abroad can shorten the curing time and improve product textural properties.

低温真空滚揉能缩短腌制时间，改善产品质构，目前国内外广泛采用；

The key consideration and the pouring temperature of the concrete under low temperature construction, curing temperature, heat storage and holding time parameters on the maximum temperature rise inside the concrete, as well as the size of the surface tensile stress, and draw some useful conclusions.

重点考虑和阐述了混凝土在冬季施工下的浇注温度、养护温度、蓄热保温时间等参数对混凝土内部最高温升以及表面拉应力大小的影响，得出了一些有益的结论。

The optimize curing time under different temperatures was also investigated.

另外，对不同养护温度下土壤聚合反应的最佳养护时间也进行了研究。

Prolonging curing time may lower the crosslinking density.

硫化温度的提高会使交联密度下降.

Experimental Study of Influencing Factors of Cement Curing Time

水泥候凝时间及其影响因素的试验研究

Dan Zufen moisture curing, the curing time is not reduced, good flexibility, and strong anti-deformation.

单组份有机硅湿气固化, 固化时不收缩, 弹性佳, 抗 形变能力强.

Determination of Curing Temperature and EV Time for Thick walled Rubber Article

橡胶厚制品硫化温度与等效硫化时间的测定