calibrating

A method for calibrating mapping camera and cubic prism coordinate system was introduced.

介绍了一种测绘相机坐标系与立方镜之间关系的标定方法.

Calibrating the rheometer to test the influence of the pressure for rheological property.

标定加压旋转流变仪,用于测试压力对流变性的影响.

So it can be solved the calibrating problem by choosing the print paper and aluminum foil as normal material.

因此我们选择了打印纸和铝箔作为标准材料解决了刻度问题。但是，这些替代标准材料的元素组成与待测靶材料存在差别，这种差别必然引起测量误差。

Optoelectronic pulse techniques is the last measurement method for calibrating the risetime of a high speed sampling oscilloscope.

光电脉冲法是解决高速取样示波器上升时间校准问题的最新技术。

Calibrating mode measures calibrating constants, and the abrasion relation of four tires.

标定模式测算标定常数 、 确定轮胎的磨损关系.

Is it precise enough The new multi-purpose cutter's calibrating instrument.

你对准了吗新一代 多功能 刀具校正器!

A New Method of Calibrating Mean Voltmeter

一种校准平均值电压表的新方法

A method of calibrating the sensors' position error, channel gain and phase uncertainties of equi spaced linear array without phase delay ambiguity was presented.

针对等距线性阵列天线的阵元位置误差和通道幅度相位不一致性问题，提出了一种采用单校正源分时多方位的无相位延迟模糊校正方法。

I am calibrating radio direction finder or adjusting compasses.

我正在校准无线电测向仪或校正指南针.

The calibration instrumentation can provide great benefit for calibrating CT on site.

该仪器的出现可以为电流互感器的现场校验提供极大的便利.

China for calibrating forging equipment rarely performs energy calibration energy calibrationcalibration.

锻压设备力能特性的标定对于检验设备的性能有着重要的意义.

Study on Dynamic Heat Flux Meter in Building Thermal Engineering and Its Calibrating Method

建筑热工用动态热流计及其标定方法的研究

Applied for thickness calibrating . sanding and surface polishing of sound wood, composite flooring . chipboard and veneer.

主要适用实木板 、 复合地板、细木工板、胶合板等工件的定厚、砂削面抛光.

The measuring method for the working dimension of the calibrating rod used for the thread calliper

螺纹千分尺校对用量杆工作尺寸测量方法初探

The Influence of Image Quality of Calibrating& With Low Permittivity Material in ECT

ECT技术对成像的影响&用低介电参数物质标定

Data acquisition and processing technology in the automatic six-port microwave power calibrating installation

六端口微波功率自动检定装置中的数据采集与处理技术

The effects of deflections are evaluated during the process of calibrating the balance.

变形影响是在天平校准的过程中测量的.

Meanwhile, two examples about calibrating transducer's dynamic response characteristic are given.

同时, 给出了采用正弦压力发生器校准传感器动态特性的两个实例.

The polynomial curvefitting is a conventional calibrating method which is influenced seriously by the thickness range and the number of the standard plates, and makes calibration work trouble.

传统的标定方法主要是通过最小二乘法进行一般多项式的曲线拟合，这种方法的拟合精度受标定点的个数以及测量范围影响较大，不利于工作人员对测厚仪进行多次反复的标定工作。

The hydraulic-electric system and die carrier design of P/ M automatic hydraulic press into which 63t single-column calibrating hydraulic press was refitted, have been briefly described.

简要介绍了改装63吨单柱校正压装液压机为粉末冶金自动压机的液压&电气系统及模架设计。

This thesis mainly discussed the design, manufacturing and calibrating procedure of the micro temperature sensor.

本文论述的主要内容是铝制热敏电阻式微温度传感器的设计 、 加工和实验测试过程.

The new method and principle of calibrating collimator

校准平行光管的新方法及其原理

To measure the calibrating curve of control rod more speedily.

可以比较快的测量控制棒的刻度曲线。

Because the traditional calibrating method is not suitable for testing optical electric current transformer, a novel test system is designed based on the IEC standard and error analysis theory.

鉴于传统的电流互感器测试方法已经不适于校验新型的电流互感器，依据IEC标准和误差分析理论，提出了光电电流互感器的测试和校验方法。

Then by the help of the genetic algorithms with adaptive searching ability, select the especial flux points at high flow velocity of the flowmeter. Thus the K factor of the flowmeter can be confirmed by calibrating these especial flux points.

然后通过遗传算法的自动寻优功能，智能选取流量仪表大流量区域内的特殊标定点，从而确定流量仪表系数K。

In order to solve the problem about the reactor period calibrating instrument, a new software signal source based on numerical calculation is presented.

为了解决反应堆周期校验仪存在的问题，提出一种基于数值计算的软件信号源。

Self calibrating and self diagnosis programs. static and standard dynamic balancing and special rebalancing.

静平衡,标准动平衡及特殊形状轮辋平衡. 带有车轮旋转防护罩安全可靠.

The calibrating byprocessing method of the MFCT. The calibrating results using the MFCT field.

试验结果表明, 中场校正方法具有较高的测量精度,可用于低副瓣相控阵天线的幅相校正与波瓣性能评估.

Dealt with the weigher calibrating, the hanging counterweigher method was successfully tryed.

在配料秤的校核上, 尝试了挂码校秤,并获得了成功.

It also provides a correct installing position and calibrating method and adjustment method.

还给出了正确的安装位置、检定方法和调整方法.