bent frame

Construction Technique for Adjusting Slanting Bent Frame Column of Industrial Workshop

工业厂房排架柱倾斜纠偏的施工技术

A special structure type made up of portal frame and traditional frame& bent structure, who has more reasonable structure layout, is applied to the actual project.

作者采用门式刚架与传统框排架结构相结合的结构类型，使厂房结构布置更合理；

Design and construction of supporting beam and removing column for mill building with reinforced concrete bent frame

钢筋混凝土排架厂房托梁拔柱设计与施工

Comparison of steel-concrete bent frame system to light gauge steel portal frame

钢-混凝土排架体系与轻钢门式刚架的比较

During the construction of a loose wheat storehouse, the steel bars of the bent frame columns were placed to the wrong position.

针对某散装小麦平房仓在施工过程中排架柱钢筋位置摆放错位的工程事故，通过现场实地调查，分析了该事故发生的原因。

The fenders were gone, the frame was bent and both pedals were missing.

自行车前后挡板都没了, 车架弯了,两个脚踏板也没了.

In this paper, a nonlinear program analyzing reinforced concrete frame and bent structures under temperature action are developed. And the temperature effect on these structures is also studied.

通过编制钢筋混凝土框、排架结构温度作用非线性分析程序，对温度作用下框、排架结构温度效应进行了较为深入的研究。

Other buildings employ portal rigid frame or steel bent frame structure.

其余建筑物均采用门式刚架或钢排架结构；

The bent frame system and portal frame system are often used for industrial mill buildings.

摘要在工业厂房中，常用的结构体系有排架体系和刚架体系。

Seismic strengthening of a two-story bent frame structure

双层排架结构房屋的抗震加固

Design Accident Analysis and Strengthening of a Zigzag Bent Frame Structure

某锯齿形排架结构设计事故分析与加固

Construction techniques of super-high bent frame columns

超高排架柱施工技术

The building of car-dumping machine is a larger-span steel bent frame structure, where bridge crane is erected.

某翻车机房系钢排架结构，设有桥式吊车，跨度较大。

Through enough computation, reasonable values of the joint distance of frame and bent structures under high, mediate and low temperature action are attained.

通过大量的计算，得出了框架结构及排架结构在高温差、中温差、低温差作用下伸缩缝间距的合理取值。

Blasting demolition of factory buildings with bent or frame structure

排、框架连体结构厂房的爆破拆除

At the same time, the suggested model are applied to prediction of seismic damage of single-story brick bent frame column industrial buildings.

并应用此模型对单层砖排架柱厂房进行了震害预测；

Column sections of a reinforced concrete zigzag bent frame structure are designed inadequate so that the bearing capacity and deformation can not be satisfied. The reason is analysed.

分析了某钢筋混凝土锯齿形排架结构设计中柱子截面取值偏小导致结构不满足承载力及变形要求的原因。

Kinetic analysis on collapsing course of steel bent frame structure cut by shaped charges

钢排架结构物线性聚能爆破失稳倒塌过程动力学分析