bending

This paper the relation among the bending moment curvature ofaxis of the beam in transverse bending.

对脆性陶瓷材料来说,抗弯强度即为横向弯曲试验中样品断裂时的应力.

The branches were bending down with the weight of the apples.

苹果把树枝坠得弯弯的.

He is bending down to tie his shoelaces.

他正弯下腰系鞋带.

The bird was enclosed in such a small space that it could not turn without bending its tail.

小鸟被关在这么狭小的空间里，不弯一下尾巴的话，都转不过身来。

The sailors are bending to the oars.

水手们在拼命地划桨.

We have succeeded in bending the thick steel plates.

我们终于把这些厚钢板弄弯了.

Rick appeared, bending his head a little to clear the top of the door.

里克到了，进门时为了避开门楣稍微低了下头。

Beam bending test of RPM pipe and control of beam bending strain in construction

RPM管梁弯曲试验及其梁弯曲应变的工程控制

Then the paper explains the principle about crystal bending based on flexible hinge, the control about anticlastic distortion, the structure ensuring the fixing height between the input and output beam and the result on the finite element model about the surface of bending crystal.

说明了以柔性铰链为基础的弧矢压弯原理、压弯晶体鞍型形变的抑制、保证出射光与入射光高差固定的结构原理、压弯晶体衍射面面形误差的有限元分析结果；

The relationship between bending modulus of elasticity and bending strength was also linear.

抗弯弹性模量与抗弯强度具有密切的线性关系.

Without a word spoken, he hurried away, with his hoary head bending low.

他什么也没说, 低着白发苍苍的头, 匆匆地走了.

The sun was bending in the west.

夕阳西下.

Standing, feet apart, right elbow bent, with his left hand bending spring, and then bend the left elbow with his right hand bending spring.

站立，两脚分开，右肘弯曲，用左手弯曲弹簧，然后左肘弯曲，用右手弯曲弹簧。

For short nanorods, the aggregates consist of regular pentagons around the gibbosity at low bending energies, and the ordered structures are gradually broken when the bending energy increases.

对于短纳米棒，在低的球表面弯曲能下，集聚体由围绕着突起的规则五边形构成，随着表面弯曲能的增加，这种有序结构被逐渐破坏。

Before bending to V shape, the metal sheet should be slotted with V_shape of a certain depth on the bending line, then the metal sheet is bent to the required shape along the V_slot. This machining method is called bending forming technique with a V_slot.

V形弯曲成形前，对金属薄板折弯处进行一定深度的V形开槽，然后在V形开槽处进行弯制成形，此种加工方法称之为V形开槽弯曲成形技术。

She'd cut a jagged hole in the tin, bending a knife in the process.

她在罐头上曲里拐弯地划了个口，其间还弄弯了一把小刀。

Bending and cutting automatically avoid the connection, the roundness, automatically cut after bending.

折弯和切割时自动避让铝条之间连接处, 圆弧处, 折弯后自动切割.

In addition, there is positive correlation between fractal dimension and bending strength , bending elastic modulus.

另外, 发现分形维数与抗弯弹性模量 、 抗弯强度之间存在正相关趋势.

Rheumatism prevents him form bending his back.

风湿病使他不能弯腰.

The frictional restraint to bending has an effect on bending.

弯曲的摩擦约束力对弯曲有影响.

For uniform isotropic materials, bending modulus of three point bending ( TPB) test and four point bending ( FPB) test are almost the same and they are almost equal to material ′ s tensile modulus.

对于均质各向同性材料，三点弯曲实验和四点弯曲实验得到的弯曲模量与拉伸模量基本上一致。

The specimens are designed into two different groups, one group of which subject to bending around axis parallel to bed joint orientation, and the other subject to bending around axis normal to bed joint orientation.

试件设计成两组，其中一组沿齿缝弯曲，另一组沿通缝弯曲。

The life of bending fretting fatigue was significantly influenced by the alternating stresses. The higher stress level was, the lower fatigue life occurred. The S-N curves of bending fretting fatigue appeared shapes of C type.

对于弯曲微动疲劳，交变应力对寿命的影响十分显著，应力水平越高，微动疲劳寿命越低，弯曲微动疲劳的S-N曲线呈C曲线型。

Bending moments produced by lift generally have only a small effect on the resultant bending moment.

一般由升力所产生的弯矩对最终的弯矩只有很小的影响.

Be careful of bending that spoon.

当心别把汤匙弄弯.

People are bending over backwards to please customers.

人们正使出浑身解数取悦顾客。

He was bending over the desk, drawing.

他正趴在桌子上画图.

Turn the pot if the plants show signs of bending towards the light.

如果花草有向阳性，就把花盆转一下。

These cruel devices are designed to stop prisoners bending their legs.

这些残酷的刑具是用来阻止犯人弯腿的。

The bending properties of cement mortar externally bonded with carbon fiber reinforced plastics ( CFRP) sheets at different temperatures were studied by means of three-point bending test. The influences of temperature on the bending properties of CFRP-cement mortar were discussed.

用三点弯曲试验研究了水泥砂浆外贴碳纤维片材后在不同温度下的抗弯性能，探讨了温度对碳纤维增强塑料（CFRP）-水泥砂浆抗弯性能的影响。