bearing shell

Impact Analysis of the Ring Slot around the Bearing Shell of Top Rollers on Cot Telescoping Process

上罗拉轴承外壳环形槽对套制胶辊的影响分析

Finite-Element Analysis of Vibration Isolation of Connecting Rod Bearing Shell on Punch press and Experimental Research of Noise Reduction

冲床连杆瓦隔振有限元分析及降噪实验研究

The main parts bearing the loads, such as shell body, rotary assembly shell, center pipe and bearing pressing cover, have been carried through with finite element intension check using the structure module of the Pro/ E software.

采用Pro／E软件的有限元分析模块，对XK35-17型旋转控制头的主要受力部件壳体、旋转总成外壳、中心管和轴承压盖进行了有限元强度校核。

Centrifugal Pouring for Copper-lead Alloy Bearing Shell

铜铅轴瓦的离心浇注

Reasons for the blow out of the bearing shell in primary waste heat boiler and its repair

第一废热锅炉承压壳体爆裂原因分析及修复

The pressure and temperature contour plot are drawn on the true oil-film form between shaft and bearing shell.

给出了以真实油膜形状作为基底的压力，温度三维等值线。

Based on function analysis, an improvement method is put forward for bearing shell construction design. An integral machining is realized technologically.

通过分析轴承壳体的功能和作用，对轴承壳体的结构设计提出了改进方法，并从工艺上实现了轴承壳体的一体化加工。

Analysis and Improvement of Interference Fit Reliability of Thin-walled Bearing Shell

薄壁轴瓦过盈配合可靠性分析及改进

Design of Flanker Die for Slots 6f Steeliness Shell to linear Bearing

直线轴承钢制外毂架长槽侧冲模具设计

This article presents the process and causes of the blow out of the bearing shell in primary waste heat boiler Also given is the repair method of the equipment

介绍第一废热锅炉承压壳体鼓包爆裂经过，分析爆裂原因，总结设备修复方法

Analysis and Processing Technics on Relief of Thinwalled Bearing Shell

轴瓦瓦口削薄量的分析与加工技术

Analysis of the Effect of bearing shell sticking on the Crankshaft by Using Three-Dimensional Finite Element Method

应用三维有限元法分析烧瓦对曲轴的影响

Transmission Bearing shell is an important vehicle parts.

变速器轴承外壳是汽车的重要零件。

Technical Treatment for Bearing Shell Heating on Rotary Kiln

回转窑轴瓦发热的技术处理

Influence of Friction Loss on the Life of Connecting Rod Bearing Shell of Engine

摩擦损耗对发动机连杆轴瓦寿命的影响

Alloy Bearing Shell Application On Allumen Bearings

锌铝基轴承合金轴瓦的应用

The commonly used bearing shell is produced by pouring the babbit in the steel substrate.

在钢铁基体上浇注巴氏合金是目前经常使用的轴瓦制造工艺方法。

The Cavitation Mechanism and Micromorphology of Bearing Shell for High ─ Output Diesel Engines

大功率柴油机轴瓦的穴蚀机理及微观形貌

The friction couples composited by bearing shell and bearing are the important machine parts which supporting axle rotates.

轴瓦与轴构成摩擦副，支撑传动轴转动，是机械设备中重要的零部件。

By the visual inspection method, this paper analyses the look of the failure bearing shell and the using condition that leading to the failure.

通过目视检查法，分析了轴瓦失效形貌及轴瓦失效的使用原因。

Mould Forming Analysis of Bearing Shell

轴承外壳模具成形分析

Manufacturing technology research and application of aircraft ECS turboexpander bearing shell

飞机环控涡轮冷却器轴承壳体制造工艺研究与应用

Application of Lead Alloy Soft Plating to Bearing Shell and Its Characteristic Analysis

铅合金软镀层在轴瓦上的应用及其特性分析

The damage reasons and selective fit of engine's bearing shell

轴瓦损伤的原因及选配

Based on the experiment and research, this paper presents the advantages of using PTFE soft belt bearing shell to substitute babbitt metal.

在实验研究基础上，提出了用PTFE（聚四氟乙烯）软带轴瓦替代巴氏合金轴瓦的问题。

The real detecting result shows that it is feasible to use the engine surface vibration signal to diagnose main bearing shell abnormal wear trouble.

现场实测结果表明，利用柴油机表面振动信号来诊断柴油机主轴瓦异常磨损故障是可行的。

Research on diagnosis of diesel engine main bearing shell abnormal wear

机车柴油机主轴瓦异常磨损故障诊断研究

Study of Dual Conical Bearing and Its Application in Hydro-Electrical Servo Actuator Buckling capacity optimization of cylindrical shell with rectangle stiffeners under uniform axial compression

双圆锥静压支承应用在电液伺服作动器中的研究矩形加筋圆柱壳轴压屈曲承载力优化

The paper describes the effects of engine load, engine speed, oil cleanliness and oil supply pressure on the bearing shell failure. It also proposes the preventive measures against the bearing shell failure.

阐述了润滑油清洁度、发动机负荷与转速，以及润滑油供油压力对轴瓦失效的影响，并提出了预防轴瓦失效的措施。

Suggestion is also given on the structural design of bearing shell.

并为轴瓦的结构设计提出建议.