angle bar

The error analysis in the measurment of a coning angle with a sine bar

用正弦规测量圆锥角实验的误差分析

Once Compression Forming of Angle Bar Edge

角钢锁口一次冲压成型

Application of angle bar space frame in headframe support

角杆空间框架在井架立架中的应用

The influence of the steel in reinforced concrete on testing was studied, which could be avoided when the arrangement line of transducers was laid in an oblique angle with the bar axis.

对埋有钢筋的混凝土表面损伤层的厚度进行检测，指出了钢筋对检测的影响程度。当换能器连线与钢筋轴向成斜角布置时，能避免钢筋的影响。

Microcomputer Control System for Angle Bar Punch-Shear Machine

角钢联合冲剪机微机控制系统

The Discussion about the Definition of Extreme Positions Angle in Four Bar Linkage Machanism

四杆机构中关于极位夹角定义的讨论

Probing into Realization of NC System of Semi-Automatic Angle Bar Production Line

半自动角钢数控生产线数控系统实现方法探讨

Controlling the Pitch of Automobile Body When Braking by Means of Adjusting the Pre Fastened Angle of Torsion Bar Suspension

调节扭杆悬架预扭角控制汽车纵向角振动

The fixer for a fishing bar frame is fixedly mounted on a fishing box for use, can realize the free adjustment of the angle of the bar frame sleeve, and is especially suitable for competitive fishing.

本实用新型作为一种鱼竿杆架的固定器，固定安装在钓箱上使用，可实现任意调整杆架套管的角度，非常适用于竞技钓鱼。

Discussion on reducing hidden overlap in tower used angle bar

减少铁塔角钢隐性折叠措施探讨

This paper focuses on the optimization design of curved stem cranking bar mechanism used single variation parameter ( auxiliary angle) based on the optimum drive angle and maximum itinerary velocity variation coefficient. The method is practical, feasible and can help improve the quality of mechanism design.

利用单变参数（辅助角）按最佳传动角及最大行程速度变化系数对曲柄摇杆机构进行优化设计，提高了机构设计质量，方法实用可行。

The long frame bar and the short frame bar adopt the mutual complementary angle slope butt-joint.

所述的长框架条与短框架条采用互为余角的斜面对接。

He heated the iron rod and bent it into a right angle. A bar of iron placed in a coil, through which a current is flowing, becomes magnetized.

他将铁棒烧热，将其弯成直角。铁棒置于带电的线圈中就会被磁化。

The additional torsion angle is obtained from the motion analysis of torsion bar tilting mechanism of cabs. The easy operation of the cab tilting and the maximum torsion angle can be adjusted through the control of.

通过对驾驶室扭杆翻转机构的运动分析，导出了扭杆的附加扭转角△，通过对西△的控制就可以调节驾驶室翻起落下的轻便性及扭杆的最大扭转角度。

These processes are likely to angle bar is constituted by the keratin.

这些突起角状物很可能主要是由角蛋白构成.

To cope with the demand for a control system dictated by angle bar shearing shop practice, a new dc on-off control system governing the operation of the flying shear in a logic manner is developed.

作者根据起停式角钢飞剪的剪切工艺要求，研制出一种新型的起停式飞剪的直流控制系统。

This paper introduces the cause producing self-excited vibration in the process of deep hole boring, analyzes the cutting vibration mechanism during machining and sums up a reasonable fit angle of boring bar for avoidance of cutting vibration.

介绍深孔镗削加工过程中自激振动产生的原理，分析加工过程中的切削颤振机理，总结出为避免切削颤振，镗杆应安装的合理角度。

The factors such as degree of freedom, damping ratio, wind angle, the former bar of disturbance are studied on the VIV.

系统对比研究了结构自由度、阻尼比、风偏角、前杆干扰对杆件涡激振动影响。

Some factors affecting splaying angle of the bar during three-strand slitting rolling

三线切分时影响棒材张开角的几个因素

In the present paper, the J integral was estimated from the relation between torque and twist angle of a cylindrical bar with a deep circumferential crack.

研究了扭转载荷下带环状裂纹圆棒试样的J积分的评价。

Optimum Design of Angle Bar Die Analysis of Crack in the Corner of Slab

角板冲模的优化钢筋混凝土结构板角斜裂缝分析

An iron bar stuck out at an angle.

一根铁棍斜伸出来。

The angle of the assembly bar lever can be adjusted according to space requirements.

装配杆的角度可根据空间需求进行调整。